ICS Port Devices Driver

admin

  1. Ics Port Devices Drivers
  2. Ics Port Devices Driver List
  3. Ics Port Devices Driver Portal
ICS Port Devices Driver-->

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by oemdrivers.com. Information on the oemdrivers.com may not be duplicated without permission. Oemdrivers.com is not responsible for any damages or losses that may arise from incorrect driver installation. The serial port is chosen under 'Tools Serial Port' in the Arduino IDE. You can find the Serial Port name by looking under the 'Ports' section in Device Manager. LeoStick and Cube4 Only. The LeoStick has some additional steps because it appears as two USB devices, one for the bootloader and a second device when a sketch is running. I've also been triyng to compile the source for the player but i wasnt able to do so, the thing is that the source compiles fine with the pre-adjustments it comes with, i mean the androidboard.mk ( i think thats the name of the file not sure), but when i changed the variables for a armv5 build, which is the core of the device and the ones that comes in the same file on the opensource.samsung. Prolific Releases World’s First Serial To Android USB API Driver Solution. Prolific provides Android USB Host API driver solution (NO root permission needed) for connecting PL2303 USB-to-Serial devices to Android-powered devices with USB Host API mode support.

  • Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

  • To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.

This document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.

System Requirements

Hardware Requirements:
Android Mobile device with the Intel Atom Processor inside except SoFIA
A micro-USB to USB cable (same cable used to charge device)
Supported Host Operating Systems:

Windows® 10 (32/64-bit)

Windows 8.1 (32/64-bit)
Windows 8 (32/64-bit)
Windows 7 (32/64-bit)
Windows Vista (32/64-bit)
Windows XP (32-bit only)
Supported Android Device Operating Systems:
Android 2.3.7 – Gingerbread (GB)
Android 4.0.x – Ice Cream Sandwich (ICS)
Android 4.4 – Kit Kat
Android 5.x – Lollipop

Installation steps

Warning: Make sure you do not have your Android device connected to your computer during the installation process.

  1. Download the installer package from https://software.intel.com/content/www/us/en/develop/android/tools.html
  2. Run the installer and accept the Windows User Account Control (UAC) prompt, if applicable.
  3. You will see the following screen. Click Next to continue. (If the installer detects an older version of the driver, accept to uninstall it.)
  4. You will see the following screen. Read and agree to the Intel Android USB Driver End-User License Agreement (EULA).
  5. You will prompted to select components as seen on the screen below. Click on next button to proceed.
  6. Choose the path for the installation and click Install.
  7. The installer will proceed to install Android USB drivers. This may take a few minutes to complete.
  8. After the driver installation is completed, click OK on the pop-up note and then click on Finish to close the installation program.

Supported USB profiles

After installing the USB driver package, plug in your Android device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:

Port
  • ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to ise in order to re-flash, and debug.
  • MTP (Media Transfer Protocol): This is Windows protocol to facilitate the transfer of media files.
  • PTP (Picture Transfer Protocol): This is Windows protocol to allow the transfer of images from digital cameras to computers.
  • RNDIS: This functionality provides a virtual Ethernet link using phone network.
  • CDC Serial (Modem AT Proxy): This functionality provides the link to Modem to allow to use AT commands through a virtual com port:
ICS Port Devices Driver

Troubleshooting

1/ Device is not recognized at all

  • These drivers are only for Intel® devices. If you’re using a device from one of our OEM, please get the drivers directly from their web site, or you can use the list of links provided by Google here.

2/ I have errors in Windows Device Manager

  • Open Windows Device Manager:
    • You may see USB Mass Storage instead of ADB Device. If it’s the case, right click on Mass Storage device icon and select ‘Uninstall’.
      Then unplug your device from the computer and install drivers’ setup again.
    • You may see Android Device with yellow warning icon. If it’s the case, right click on Android Device icon and select ‘Uninstall’.
      Then unplug your device from the computer and install drivers’ setup again

3/ I can see Portable Device but no Android Debug Bridge (ADB) profile

Ics Port Devices Drivers

You may have not enabled “USB Debugging” option.
The developer options on your phone are hidden by default. Open the settings on your phone, and find the About section. Look through it until you see the 'Build number' entry. Tap it five times in quick succession, and you should see a small dialog letting you know that you're now a developer.
Come back to Settings main menu and go into Developer Options, then enable USB Debugging.

4/ I’m old school and still using Windows XP. When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.

Ics Port Devices Driver List

Ics port devices driver portal

Ics Port Devices Driver Portal

MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.


Further Questions & Support
For other troubleshooting support, post questions on the Intel support forum for Android developers: (https://software.intel.com/content/www/us/en/develop/android.html)