2019-04-01 FiiOUSBDACDriver-V4.47.0.exe 끂 92202 2.22 MB 2019-04-01 Installation and usage guide of the new generic USB DAC driver for FiiO players & DAC.pdf. If the file exceeds the sample rate of the DAC box, the Windows 10 driver will down-sample it to 96k samples/sec. That is a required function. For the internal sound card in the laptop, everything gets down-sampled to 48k samples/sec. The web has almost no information on the Windows 10 High-Resolution driver that connects directly to USB DACs.

• Dsd Docet-lector Dac Driver Download For Windows 10 32-bit
• Dsd Docet-lector Dac Driver Download For Windows 10 Pro

The Micca OriGen+ USB audio DAC and preamplifier is a studio master grade digital audio playback device that supports high resolution PCM audio up to 24-bit/192kHz and DSD64 audio. Its powerful preamp and headphone amplifier makes the OriGen+ especially well suited in a compact desktop computer audio system together with powered monitors and headhpones. Use the OriGen+ to bypass a computer’s sound card and unlock the full sonic potential of your music library.

Digital Finesse

The digital circuitry of the OriGen+ consists of a VIA VT1736 USB 2.0 High Speed 480Mbps audio controller and a Cirrus Logic CS4392 stereo D/A converter. This capable combination provides asynchronous decoding and conversion of PCM audio up to 24-bit/192kHz as well as native and DoP support for DSD64 (2.8MHz) audio. Advanced audio stream interface support includes both ASIO and WASAPI Push/Event output modes. Selectable USB or Optical S/PDIF digital input for flexible source connection.

Analog Brawn

The analog section of the OriGen+ provides switchable line-level or headphone output, using JRC NJM4556 op amps with two output gain levels of 5.6Vrms and 1.7Vrms. The selectable gain design provides excellent drive capability into any downstream amplifiers with enhanced signal strength, low noise, and low interference. The headphone outputs are similarly powerful, with only 0.5 Ohm output impedance and able to drive 16-600 Ohm headphones.

Solid Construction

Starting with a steel tub chassis, the OriGen+ is capped with an anodized aluminum top plate and finished with a solid machined aluminum volume knob. The TOCOS sealed potentiometer used for volume control offers long operating life and a smooth weighted feel. The all-metal construction makes the OriGen+ exceptionally durable and helps shield against unwanted interference.

Hearing is believing, try the OriGen+ risk free with your computer and your music library. The OriGen+ is compatible with Windows, Mac, and Linux computers, as well as tablets and mobile devices that have USB-OTG audio capability. If you are not absolutely delighted with the OriGen+’s performance, simply return it for a refund.

Inputs & Outputs

• Asynchronous USB 2.0 input for use with Windows XP/7/8/8.1/10, and MAC OSX.
• Optical S/PDIF input supports PCM signals from other audio sources.
• Front 3.5mm and 1/4” stereo headphone outputs. Powerful built-in headphone amp supports 16-600 Ω headphones.
• Rear 3.5mm stereo analog line level and combination optical S/PDIF digital output.

Digital Stream Formats

• PCM audio up to 24-bit/192kHz
• DSD64 (2.8MHz), Native or DoP
• ASIO and WASAPI Push/Event support

Key Components

• VIA VT1736 USB 2.0 High Speed 480Mbps audio controller
• Cirrus Logic CS4392 Stereo D/A Converter
• JRC NJM4556 operational amplifier

Ideal For:

• Use with the PB42X Powered Monitors for a high quality desktop computer audio system.
• Provide low noise and high power headphone output for enjoying music on any computer.

General
PCM Formats	PCM (44.1/48/88.2/96/176.4/192kHz, 16/24bit)
DSD Formats	DSD64 (2.8MHz), Native or DoP
USB Interface	USB 2.0, Asynchronous Transfer Mode
Audio Controller	VIA VT1736
Digital-to-Analog Converter	Cirrus Logic CS4392
Output Op-amp	JRC NJM4556
Channel Imbalance	< 0.5dB
Optical S/PDIF Format	PCM Only (No signal when playing DSD)
Power Source	5V/500mA
Dimensions	4.6 x 2.0 x 1.9 Inch (116mm x 51mm x 47mm)
Weight	6 Oz (170g)
Line Level Output
Frequency Response	20Hz ~ 20kHz +/- 0.1dB
THD+N	< 0.003% (1kHz, A-wt.)
Signal to Noise Ratio	> 110dB (1kHz, A-wt.)
Crosstalk	> 96dB (1kHz)
Output Voltage	5.6Vrms (Gain: 0dB); 1.7Vrms (Gain: -10dB)
Headphone Output
Frequency Response	20Hz ~ 20kHz +/- 0.1dB
THD+N	< 0.003% (1kHz, A-wt.)
Signal to Noise Ratio	> 110dB (1kHz, A-wt.)
Crosstalk	> 96dB (1kHz)
Output Voltage	5.6Vrms (Gain: 0dB); 1.7Vrms (Gain: -10dB)
Output Current	70mA (Nominal); 100mA (Max)
Output Impedance	0.5 Ω
Load Impedance	16 ~ 600 Ω

What’s Included

• Micca OriGen+ unit
• USB cable
• 3.5mm to RCA audio cable
• User’s Manual

User’s Manual:

Micca OriGen+ User’s Manual (opens in a new tab/window)

Drivers:

Micca OriGen+ Drivers - Windows XP/7/8/8.1/10 - Version 1.2.5

Installation Instructions:

• Download the ZIP file.
• Extract the contents of the ZIP file to a temporary folder.
• Please refer to the User’s Manual for detailed driver installation instructions. For Windows 10 with Anniversary Update, please see this tutorialfor special instructions: Tutorial
• Delete the temporary folder when finished.

Relase Notes:

• Removes USB Device Deck.
• Improved system compatibility.

Known Issues:

• Driver is compatible with Windows 10. However, the Anniversary Update released in August 2016 for Windows 10 breaks the installation process of this driver and requires a manual work-around. Please see this tutorial for special instructions: Tutorial

Micca OriGen+ Drivers - Windows XP/7/8/8.1/10 - Version 1.2.3

Installation Instructions:

• Download the ZIP file.
• Extract the contents of the ZIP file to a temporary folder.
• Please refer to the User’s Manual for detailed driver installation instructions.
• Delete the temporary folder when finished.

Relase Notes:

• Initial release

Known Issues:

• Driver is compatible with Windows 10, but the VIA Control Panel does not work for setting default sampling rate and bit depth. The sampling rate and bit depth can be set in the playback devices properties menu.

Micca OriGen

Micca OriGen+ does not install, not recognized by computer

A small batch of Micca OriGen+ was shipped with defective USB cables. If your Micca OriGen+ does not install correctly or is not detected by the computer this may be caused by a defective USB cable.

The defective USB cable will provide power to the OriGen but will not pass data correctly. When this occurs, the power light on the OriGen+ will turn on in red color instead of blue. When this happens, try a different USB cable to see if this resolves the issue.

If the USB cable you received with the OriGen+ is defective, please contact our support team at support@miccatorn.com to receive a replacement USB cable.

Posted in: Micca OriGen

Micca OriGen/OriGen+ Driver Install – Windows 10

The Micca OriGen and OriGen+ uses a VIA USB interface chip which now enjoys support from Windows 10’s built-in USB Audio 2.0 drivers. For the time being, the installation is not automatic and involves some manual steps. Please follow the steps below to make this installation:

1. Connect the OriGen to your computer.
2. Click on the Windows icon on the lower left hand corner and type “Device Manager”, click on the Device Manager in search results. When device manager opens, look for “VIA USB Device” which should be listed with a yellow triangle. Right click on “VIA USB Device” and select “Update Driver”, as shown below.
3. In the window that opens, select “Browse my computer for driver software”, as shown below:
4. On the next window, select “Let me pick from a list of available drivers on my computer”, as shown below:
5. On the next window, under Manufacturer, select “Microsoft”. Under Model, select “USB Audio 2.0”, and click next, as shown below:
6. A warning will pop up asking you to confirm that you want to use this driver, click “Yes”, as shown below:

That’s it! The OriGen should now work.

If you wish to use the VIA-supplied drivers instead of Windows USB Audio 2.0 drivers, please follow the instructions below:

With more recent releases of Windows 10, the driver installation sequence has changed in a way that was not anticipated in the Micca OriGen driver package. While we work on a driver package update, please observe the following instructions when installing the driver on Windows 10:

1. Be sure the OriGen is not connected to the computer.
2. Download the OriGen driver package to your computer’s “Downloads” folder, and extract it.
3. Inside the driver folder, right-click on “Step-1-Turn-On-Install-Mode” and select Run as administrator. A window will pop up showing execution results – if you see an error that “Secure Boot” has prevented the settings change, you must temporarily disable Secure Boot and execute this step again. Microsoft provides instructions on how to disable Secure Boot in this tutorial: [link to tutorial]. If no errors are displayed, restart your computer when prompted.
4. Once the computer finishes restarting, Inside the driver folder, double-click on “Step-2-Install-Driver”. Follow the install prompts and on the final screen click No, I will restart my computer later and click Finish.
5. At this time, connect the OriGen and turn it on.
6. In the driver folder, double-click on “Step-3-Fix-Driver-Association”, the Device Manager window will open. Expand the Sound, video and game controllers group, there should be a VIA USB Device listed with a triangle exclamation mark.
7. Right click on the VIA USB Device and select Properties, the pop up box will show the error “Driver is not intended for this platform”.
8. Click on Update Driver, then click on Browse my computer for driver software. Click on Browse and navigate to the driver folder, and the sub folder “WIN10”, Click Next when ready. The driver will be installed correctly.
9. Inside the driver folder, right-click on “Step-4-Turn-Off-Install-Mode” and select Run as administrator. Restart your computer when prompted.

The last few steps should look similar to the screen shot below:

Posted in: Micca OriGen

Micca OriGen/OriGen+ Does Not Support DTS or Dolby AC3 Signal

The Micca OriGen/OriGen+ supports PCM or DSD audio decoding over USB. It does not support decoding of DTS or Dolby AC3 audio streams. Furthermore, it is limited to decoding PCM signals over the optical input since DSD cannot be transmitted over an optical connection due to bandwidth limitations.

When configuring the OriGen/OriGen+ device properties, be sure that “DTS” and “Dolby Digital” checkboxes are unchecked. Similarly, if you are connecting the OriGen/OriGen+ to the optical output on your computer, check that the device properties for the optical output also has the “DTS” and “Dolby Digital” checkboxes blank. This ensures that the computer will perform decoding of DTS and Dolby signals, and output the audio in PCM format.

Posted in: Micca OriGen

Micca OriGen no signal from optical S/PDIF output

The OriGen’s 3.5mm jack also doubles as a optical mini output jack. When it is working, the jack will glow red indicating that a signal is present. While this output will work for most situations, there are three known limitation with the optical S/PDIF output where it will not produce any output:

• If the PCM signal is 32-bit 192kHz as this exceeds optical specifications. The limit is 24-bit 192kHz.
• If the output mode is ASIO. The VIA USB chip only supports S/PDIF output when the data stream is Direct Sound or WASAPI.
• When used with certain Android phones over USB OTG, since certain Android implementations lack the necessary endpoint support for S/PDIF output.

Posted in: Micca OriGen

Windows 10 (1803) Audio Device Settings

The new Windows 10 1803 release changed the way that audio device settings are accessed. If you right click on the speaker icon on the lower right hand corner of the screen and click on “Open Sound Settings”, this brings you to the new Windows 10 style settings menu rather than the older “Control Panel” style settings page. Unfortunately, this page seems to currently have some issues as users report that settings made on this page are not being stored correctly and revert back to the old values. Instead, follow the steps below to access the original “Control Panel” style settings:

1. Click on the Windows icon on the lower left hand corner of the screen and type “Sound”, then click on the “Sound” icon from the search results.
2. The menu that pops up is the “Control Panel” style sound settings, and settings made here will be saved without any issues

Posted in: Micca OriGain, Micca OriGen

SOFTWARE LICENSING AGREEMENT

Dsd Docet-lector Dac Driver Download For Windows 10 32-bit

PLEASE READ THIS CAREFULLY BEFORE YOU OPEN THE DISK PACKAGE.
THE FOLLOWING IS THE SOFTWARE LICENSING AGREEMENT BETWEEN YOU, THE END USER, (REFERRED TO IN THIS AGREEMENT AS “YOU” OR “YOUR”) AND KORG INC. (REFERRED TO IN THIS AGREEMENT AS “KORG”) FOR YOUR USE OF THE SOFTWARE IN THIS PRODUCT AND OUR SUPPORT SERVICES TO YOU. THE ENCLOSED SOFTWARE PROGRAM IS LICENSED BY KORG TO YOU AS THE ORIGINAL PURCHASER FOR USE ONLY ON THE TERMS SET OUT HEREIN. BY USING (INSTALLING OR MAKING A BACKUP COPY OF) THE SOFTWARE, YOU ARE AGREEING TO THE TERMS SET OUT IN THIS AGREEMENT. IT IS THEREFORE IMPORTANT THAT YOU READ THIS LICENSING AGREEMENT WITH CARE BEFORE USING THE SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT
Korg grants you, the original purchaser, the non-exclusive right to use the program and the data file constituting this software and the upgrade program(s) as well as the data file(s) which may be distributed to you from time to time (hereinafter referred to collectively as “Licensed Program”) on associated Korg product(s) and/or a single computer under your control and used by only one person at a time.
All references to the Licensed Program shall mean the object code only of the program(s) comprising the Licensed Program.
The Licensed Program and any manuals or other written documentation supplied with the Licensed Program belongs to you. The ownership of the rights to and the copyright of the Licensed Program itself (whether supplied via a storage device, diskette, download from the Internet or otherwise) and the copyright of the contents of any manual or other written document belong to Korg.
Korg reserves the right to make modifications to the Licensed Program and to the support services set out in clause 7 of this agreement (referred to in this agreement as “the Services”) without prior notification to you.

2. RESTRICTIONS
The Licensed Program contains copyrighted information. For the purpose of protecting such copyrights, you may not decompile, disassemble, reverse engineer, or otherwise reduce the Licensed Program to a human-perceivable form (save as may be permitted by law).
You may not duplicate, alter, modify, rent, lease, resell, assign, loan, sub-license, distribute the whole or part of the Licensed Program, or make derivative works based on what is contained in the Licensed Program. (However, it is not included in this restriction that you create derivative works based on the data file(s).)
You may not transfer the Licensed Program to another computer through a network.
You may make only one backup copy of the Licensed Program, which you are only allowed to use for the purpose of restoring the Licensed Program.

3. TERMINATION
This agreement takes effect on the date you have received the Licensed Program. The license granted in this agreement will terminate automatically without notice from Korg in the event that you breach any provision of this agreement or in any way infringe Korg’s copyright in the Licensed Program.
In such event you must destroy the Licensed Program and its backup copy immediately.

4. PRODUCT WARRANTY
Korg warrants that the Licensed Program when properly used will provide the facilities and functions as described in the accompanying documentation but does not warrant that the operation of the Licensed Program will be uninterrupted or error-free.
This warranty shall however only apply to the latest version of the Licensed Program (provided that Korg has reasonably made such version available to you) and shall not apply to any previous version or versions of the Licensed Program.
Korg’s obligation and your exclusive remedy under the warranty mentioned above, is limited either:
(a) to Korg at its own expense using all reasonable endeavours to rectify any non-conformance with the warranty by repair (by way of a patch, work around, correction or otherwise) within a reasonable period of time or,
(b) to a refund of the license fee paid (if any) if in Korg’s reasonable opinion it is unable to rectify such non-conformance within a reasonable timescale or at an economic cost, whereupon this agreement and the license created by this agreement shall terminate.
The warranties provided in this clause 4 is limited to the product purchased from an authorized retailer, distributor or download from the Korg website.

5. LIMITATIONS ON LIABILITY
You agrees that the express obligations and warranties made by Korg in this Agreement are (so far as is permitted by law) in lieu of and to the exclusion of any other warranty, condition, term, undertaking or representation of any kind, express or implied, statutory or otherwise, relating to anything supplied or services provided under or in connection with this Agreement including (without limitation) any warranty as to the condition, quality, performance, merchantability or fitness for purpose of the Licensed Program and the Services or any part of them.
Korg, in no event, will be liable for the direct, derivative, collateral or consequential damage caused by the use of or the inability of using the Licensed Program (including but not limited to damage of data, lost commercial profit, interruption of work, lost commercial information), regardless of the degree of damages, and even if Korg was aware of the possibility of such damages or the possibility of a claim for damage from a third party in advance.
Nothing in this agreement shall affect the statutory rights of any person dealing with Korg as a consumer.

6. THIRD PARTY SOFTWARE
Korg may on occasions supply software programs, data files and/or documentation belonging to a third party or parties (hereinafter collectively referred to as “Third Party Software”).
If supplied in conjunction with any Korg instrument or equipment, such Third Party Software shall only relate to the non-essential functions of such instrument or equipment.
If Third Party Software has been supplied (whether in conjunction with any Korg instrument or equipment, or as a stand-alone product) a notice to that effect will be contained with or on the disk supplied and in such circumstances Korg shall be deemed to be acting as the agent only of the supplier of such Third Party Software.
In the event that Third Party Software is supplied, you agree to be bound by and to observe any terms and conditions relating to the use of such Third Party Software.
Korg shall not be obliged to provide support services for any Third Party Software supplied (whether relating to operating methods, defects, or otherwise).
Korg provides no warranty in relation to any Third Party Software supplied and all warranties whether express or implied as to the condition, quality, performance, merchantability or fitness for purpose of the Third Party Software or any part of the same are (in so far as may be permitted by law) hereby excluded.
Korg furthermore disclaims all responsibilities for direct, derivative, collateral or consequential damages caused by the use of or the inability of using the Third Party Software (including but not limited to damage of data, lost commercial profit, interruption of work, lost commercial information), regardless of the degree of damages, and even if Korg was aware of the possibility of such damages in advance.

7. SUPPORT SERVICES
Support services such as technical support or upgrade support for this product are provided according to the support service policies of Korg’s distributors applicable in each country.
Korg reserves the right to amend any such policies from time to time in its absolute discretion.

Dsd Docet-lector Dac Driver Download For Windows 10 Pro

8. GENERAL
The license created by this agreement is personal to you and you may not assign or otherwise transfer your rights or obligations under this agreement without the prior written consent of Korg.
If any part of this Agreement is found by a court of competent jurisdiction or other competent authority to be invalid, unlawful or unenforceable then such part shall be severed from the remainder of this Agreement which will continue to be valid and enforceable to the fullest extent permitted by law.
This agreement is governed by and construed under the local law of the country where this product has been purchased.
You hereby agree to the exclusive jurisdiction and venue of the aforementioned territory, without regards to conflicts of law provisions.
Headings have been included for convenience only and shall not be used in construing any provision in this Agreement.